0656 FLOOR SANDING AND FINISHING - STAIN / FILLER / DECK FINISH
1. GENERAL
1.1 Scope
Supply and application of a colouring stain, grain filler or exterior deck finish to prepared timber. Product: Bona DriFast Stain (solvent).
1.2 Referenced documents
1.3 Compliance and certification
No third-party certifications published.
2. PRODUCTS
2.1 Stain / filler / deck finish
Product: Bona DriFast Stain.
Chemistry: solvent.
VOC: 550.0 g/L.
Colour / tint: per architect's selection from the manufacturer's colour range.
2.2 Substrate compatibility
Substrate not nominated; verify species compatibility against the Bona species x primer matrix before tender.
3. EXECUTION
3.1 Preparation
Sand final grit P120; water-pop if required by the stain TDS.
3.2 Application
Apply 1 x DriFast Stain then primer + finish; overcoat within 48 h at 20.0-40.0 m2/L m2/L per coat. Overcoat with the specified Bona topcoat within the window stated on the TDS (typically 48 hours for DriFast Stain). Prime with the manufacturer's system: 1 x DriFast Stain then primer + finish; overcoat within 48 h.
4. SELECTIONS
Complete the application schedule for each area of the project. Supporting documents (TDS, colour chart, SDS, certification PDFs, Specifier Paragraphs) are listed under Required attachments.
| Room / Area | Substrate | Product | Sheen | Coats |
|---|---|---|---|---|
| [Insert area] | [Substrate] | Bona DriFast Stain | [Sheen] | [n] |
Warnings
- Substrate not nominated; verify species compatibility against the Bona species x primer matrix before tender.
Required attachments
- Bona DriFast Stain TDS.pdf (tds)
- Bona DriFast Stain SDS.pdf (sds)
- Bona DriFast Stain Specifier Paragraphs.pdf (specifier)